24

2023

-

04

What are the general classifications of terminal machines?

Classification :

Company News

Industry News


I. Overview

Terminal machine refers to a machine used in wire processing, which can press the hardware head to the wire end, and then do conduction. The terminal made by the terminal machine is usually for more convenient connection, without soldering can stably connect the two wires together, and only need to be unplugged when dismantling

Second, the working principle

(Stepping principle) The motor is constantly rotating. Wrapped with a relay belt clutch, each movement is a standard "O" out, which is the most common.

In the past five years, there has been a (silent) terminal machine with a server, and his operating principle is different from the above, just give the server a message, and this information is transmitted to the motor to form an action.

Terminal crimping and excellent quality products.

Third, the classification of terminal machine

Terminal machine can be classified as automatic terminal machine, continuous stripping belt terminal machine, ultra-quiet terminal machine, pneumatic terminal machine, terminal machine, computer line automatic peeling and terminal machine, pin machine terminal machine, gold wire terminal machine, etc.

1. Automatic terminal machine can be divided into:

(1) Automatic single-head crimping terminal machine (using PLC or single-chip microcomputer control, servo motor or stepper motor to provide power, the production process does not require manual participation, high production efficiency, at present, this type of domestic equipment can achieve about 5000pcs per hour wire cutting, thin skin, single-ended pressing terminal, can automatically detect the terminal crimping quality, in the current domestic market is more popular);

(2), automatic single-head pressed single-head twisted wire tin terminal machine (using PLC or single-chip microcomputer control, servo motor or stepper motor to provide power, the production process does not require manual participation, high production efficiency, at present, this type of domestic equipment can achieve about 4000pcs per hour wire cutting, thin skin, single-end pressing terminal, single-ended twisted wire + adhesive flux + tin, can automatically detect the terminal crimping quality, is one of the most automated terminal machines in the domestic market);

(3) Automatic double-head crimping terminal machine (using PLC or single-chip microcomputer control, servo motor or stepper motor to provide power, the production process does not require manual participation, high production efficiency, at present, this type of domestic equipment can achieve about 4500pcs per hour wire cutting, thin skin, double-ended pressing terminal, can automatically detect the terminal crimping quality, extremely high precision);

(4) Automatic parallel terminal punching machine. (Using PLC or single-chip microcomputer control, servo motor or stepper motor to provide power, the production process does not require human participation 4. Labor participation, high production efficiency, at present, this type of domestic equipment can achieve about 7000pcs per hour of wire cutting, 11000pcs terminal crimping, mid-term 3500pcs for parallel pressing terminals, 7500pcs for single-wire pressing terminals, can automatically detect the quality of terminal crimping, with the above three automatic terminal machine functions, It is one of the terminal machines with the highest degree of automation in the domestic market;

2. Even stripping with terminal machine

The stripping terminal machine is a semi-automatic model. As the name suggests, it has the function of automatic peeling and pressing terminals, but it requires manual feeding and manual control of the foot power switch to work, high production efficiency and low price.

3. Ultra-quiet terminal machine

The terminal machine with the servo (frequency converter) that appeared in the past five years is a semi-automatic model, which requires manual feeding and manual control of the foot pedal power switch to work. It is similar to the working principle of the continuous stripping terminal machine, but it does not have the function of automatic thin skin (generally used with the computer wire cutting machine), and the working energy consumption is low and the price is low.

4. Terminal detection

To detect whether the terminal is qualified, it is necessary to pass the terminal section analyzer, and the process is divided into: cutting---- grinding and polishing---- electrolysis (corrosion) ----- observation

5. Daily maintenance

The maintenance of the terminal machine is divided into daily maintenance and secondary maintenance. Here is a brief introduction to its daily maintenance methods

The maintenance of the terminal machine on weekdays can be carried out according to the following steps:

Usually the stamping guide rail of the terminal machine must be lubricated with oil once every 1 to 2 hours, and the oil is added on the top of the terminal machine, and each time the oil is not too much, 2-3 drops are appropriate;

The operator must clean the machine daily to remove debris, dust and excess oil from the surface of the machine

Finally, the main speed bearing of the terminal machine must be buttered every week: open the back cover of the terminal machine, remove the driven pulley card, remove the pulley, a dozen butter (evenly coated on the surface of the high-speed bearing), and restore (Note: During the process of disassembling the pulley, it should be noted that the bearing ball is missing).

Finally, the main speed bearing of the terminal machine must be buttered every week: open the back cover of the terminal machine, remove the driven pulley card, remove the pulley, a dozen butter (evenly coated on the surface of the high-speed bearing), and restore (Note: During the process of disassembling the pulley, it should be noted that the bearing ball is missing).

Finally, the main speed bearing of the terminal machine must be buttered every week: open the back cover of the terminal machine, remove the driven pulley card, remove the pulley, a dozen butter (evenly coated on the surface of the high-speed bearing), and restore (Note: During the process of disassembling the pulley, it should be noted that the bearing ball is missing).