24

2023

-

04

Can the fully automatic computer pipe cutting machine cut hard plastic hoses?

Classification :

Industry News

Company News


Can the automatic computerized pipe cutting machine cut hard plastic tubes?

A question that many customers will ask: can your automatic computerized pipe cutting machine cut hard plastic material tubes?

Touch screen control, simple operation, cylinder cut-off, strong power, special tool processing, wear-resistant and durable, stepping belt feeding, efficient and stable;

The answer is of course yes, first, snap the cutter to the position where you need to cut it, then turn it about 10 turns, while turning the handle slightly to make a little contact between the blade and the tube, and then turn another 10 turns or so. At this time, you will hear a click, which means that the tube has been cut, and finally gently bend the cutting position left and right, and you can easily remove the sawn bellows.

Well, the use of the bellows cutter Xiaobian will introduce you here today, isn't it very simple, quickly pick up the cutter and try it. Finally, the editor emphasizes the use of bellows cutters

Notes:

Note: When using the knife, the amount of knife feed should not be too large, use all the strength of the whole body to turn or hit the handle with the hammer, which is laborious and very easy to damage the knife. First, snap the cutter to the position where you need to cut it, then turn it about 10 turns, while turning the handle a little more to make a little contact between the blade and the tube, and then turn another 10 turns or so. At this time, you will hear a click, which means that the tube has been cut, and finally gently bend the cutting position left and right, and you can easily remove the sawn bellows.

Well, the use of the bellows cutter Xiaobian will introduce you here today, isn't it very simple, quickly pick up the cutter and try it. Finally, the editor emphasizes the precautions when using bellows cutters:

Note: When using the knife, the amount of knife feed should not be too large, use all the strength of the whole body to turn or hit the handle with the hammer, which is laborious and very easy to damage the knife.

端子机